MakeCV

Embedded Engineer resume example (2026)

This embedded engineer resume example is for firmware and embedded software engineers working on microcontrollers, RTOS and communication protocols in automotive, IoT and industrial products. It includes a sample resume from an EV battery firmware engineer, summaries for every stage, bullet points and advice on showing both firmware and hardware skills.

Use this example in the free resume builder

Sample embedded engineer resume

Shruti Hegde — Embedded Software Engineer

Embedded software engineer with five years of experience writing C firmware for ARM Cortex-M microcontrollers in electric vehicles and industrial IoT. Develops battery management system firmware for an electric scooter maker, covering state-of-charge estimation, CAN diagnostics and over-the-air updates. Comfortable from register-level drivers to hardware-in-the-loop testing, and works closely with hardware and validation teams.

Embedded Software Engineer, Voltiq Motors (Mar 2023 – Present)

  • Develop battery management system firmware in C on ARM Cortex-M4 for an electric scooter sold in 40 cities, covering cell balancing, state of charge and fault handling.
  • Improved state-of-charge accuracy from about 8 to 3 percent error with an extended Kalman filter, reducing range complaints in service feedback.
  • Implemented CAN messaging and UDS diagnostics between the BMS, motor controller and dashboard, enabling over-the-air updates for 60,000 vehicles.
  • Added hardware-in-the-loop tests and MISRA C static analysis, cutting firmware defects found in vehicle validation by 45 percent.

Embedded Engineer, Sensorix Automation (Jul 2021 – Feb 2023)

  • Wrote FreeRTOS firmware for an STM32 industrial vibration sensor that reports over Modbus and MQTT to plant dashboards.
  • Reduced sensor power consumption by 35 percent with low-power modes, extending battery life from 14 to 22 months.
  • Brought up new PCB revisions with the hardware team, debugging I2C, SPI and UART peripherals with oscilloscopes and logic analysers.

Education

  • B.E., Electronics and Telecommunication Engineering — Coastal Institute of Technology, Udupi (CGPA 8.6 / 10)

Skills

Embedded C, C++, ARM Cortex-M (STM32), FreeRTOS, CAN and UDS, I2C, SPI and UART, Battery management systems, MISRA C and static analysis, Hardware-in-the-loop testing, Oscilloscope and logic analyser, Python test automation, Git and Jenkins

Why this resume works

  • The sample names the exact microcontrollers, protocols and standards used, which embedded hiring managers scan for first.
  • Results like better state-of-charge accuracy and longer battery life show engineering impact in terms a product team understands.
  • Board bring-up and debugging bullets prove the candidate is comfortable at the hardware level, not only writing code.

Embedded Engineer resume summary examples

Fresher

B.E. Electronics graduate with strong Embedded C skills and hands-on experience with STM32 and ESP32 boards. Built a CAN-based vehicle data logger as a final-year project and completed a six-month internship writing sensor drivers. Familiar with I2C, SPI, UART, FreeRTOS basics and lab debugging tools, and looking for a graduate embedded engineer role.

2–5 years

Embedded software engineer with three years of experience developing firmware for consumer IoT devices on ARM Cortex-M and ESP32. Writes device drivers, RTOS tasks and BLE and Wi-Fi connectivity, and has reduced device power use by 40 percent. Comfortable working with hardware teams through board bring-up and production testing.

Senior

Senior embedded systems engineer with eleven years of experience in automotive and industrial electronics. Has led firmware teams of six on ISO 26262 projects, designed AUTOSAR-based ECU software and owned diagnostics and OTA strategy. Looking for a firmware architect or embedded lead role.

Embedded Engineer bullet points you can adapt

  • Wrote low-level drivers for ADC, PWM and timers on STM32 to support a new motor control board.
  • Ported legacy bare-metal firmware to FreeRTOS, improving response time for time-critical tasks.
  • Reduced boot time from 3 seconds to 800 ms by restructuring initialisation and peripheral setup.
  • Implemented a secure bootloader with signed firmware images for over-the-air updates.
  • Developed BLE communication between a wearable and its mobile app, with reconnection in under 2 seconds.
  • Wrote Python scripts for automated end-of-line testing, cutting production test time per unit by 40 percent.
  • Traced intermittent SPI data corruption to a timing issue with a logic analyser and fixed it in firmware.
  • Applied MISRA C rules and Unity unit tests, reducing static analysis warnings by 80 percent.

Skills to put on a embedded engineer resume

Hard skills

  • Embedded C
  • C++
  • ARM Cortex-M microcontrollers
  • RTOS (FreeRTOS, Zephyr)
  • Device drivers and HAL
  • I2C, SPI and UART
  • Automotive networks (CAN, LIN, UDS)
  • Wireless (BLE, Wi-Fi)
  • Bootloaders and OTA updates
  • Low-power design
  • MISRA C and static analysis
  • Debugging tools (JTAG, oscilloscope, logic analyser)
  • Python for test automation
  • Version control and CI

Soft skills

  • Systematic debugging
  • Collaboration with hardware teams
  • Attention to detail
  • Documentation
  • Patience
  • Problem solving

How to write an embedded engineer resume summary

Open with your years of experience, the type of products you work on and your main platforms, such as automotive ECUs on ARM Cortex-M or IoT sensors on ESP32. Then name the key technologies: RTOS, communication protocols, diagnostics or low-power design. Add one product outcome, like longer battery life, faster boot time or fewer field failures. Embedded roles are highly specific, so recruiters scan for matching microcontrollers and protocols in the first few lines. Finish with the domain you want to grow in.

Show both firmware and hardware skills

Embedded engineers are valued for working across the hardware and software boundary. Include bullets on writing drivers, RTOS tasks and communication stacks, and bullets on board bring-up, debugging with oscilloscopes or logic analysers and working with hardware designers. Name the protocols and standards you have used, such as CAN, UDS, MISRA C or ISO 26262, because they are common filters. Quantify results with power consumption, memory footprint, timing, accuracy or defect rates so your impact is as concrete as the hardware you work on.

Projects for freshers and career switchers

Embedded hiring often happens through campus drives and referrals, and practical projects help you stand out. Build two or three projects on real boards, such as a sensor node with low-power modes, a CAN data logger or a small RTOS-based controller. Publish the code and a short write-up with photos or wiring diagrams. On your resume, describe each in one sentence with the microcontroller, protocols and one measurable detail. Post-graduate training in embedded systems is worth listing too, with the main boards and tools it covered.

FAQ

What should a fresher embedded engineer resume include?
Embedded C, microcontroller experience, communication protocols and debugging skills, backed by projects on real hardware. Add internships, your final-year project and any post-graduate embedded systems training.
Should embedded engineers list both C and C++?
Yes, if you use both. Most microcontroller firmware is written in C, while C++ is common in larger embedded Linux and automotive projects, so state which you use most.
How do I show automotive experience on an embedded resume?
Mention the vehicle systems you worked on, such as BMS, motor control or infotainment, and the standards and tools involved, like CAN, UDS, AUTOSAR or ISO 26262. Keep confidential details general.
Is embedded Linux different from microcontroller firmware on a resume?
Yes. Embedded Linux roles focus on kernel drivers, Yocto or Buildroot and board support packages, while microcontroller roles focus on bare-metal and RTOS firmware. Make clear which you do, or list both if you work across them.