Electrical Engineer resume example (2026)
This page is for electrical engineers in power distribution, substations, industrial maintenance, building services and electrical design. It includes a sample resume for an electrical engineer with six years of experience in switchgear and substation projects, plus summaries, bullet points, skills and practical tips for freshers and experienced engineers applying through campus, job portals or referrals.
Use this example in the free resume builder
Sample electrical engineer resume
Ritika Das — Electrical Project Engineer
Electrical engineer with six years of experience in 33/11 kV substation projects, LT and HT panel design and industrial electrical maintenance. Manages design review, installation, testing and commissioning while keeping sites safe and compliant with IS and IEC standards. Skilled in AutoCAD Electrical, ETAP and protection relay settings. Seeking a senior electrical engineer or project lead role.
Electrical Project Engineer, Kalinga Power Systems (Apr 2022 – Present)
- Lead execution of 5 new 33/11 kV substations for a state distribution utility, from layout approval to commissioning, worth Rs 42 crore in total.
- Commissioned all 5 substations on schedule with zero lost-time incidents by enforcing permit-to-work, LOTO and daily safety briefings.
- Performed load flow and short-circuit studies in ETAP to finalise transformer and breaker ratings, avoiding a costly redesign on 2 sites.
- Coordinate testing of transformers, CTs, PTs and protection relays with vendors and utility engineers, with every test report accepted at first inspection.
Design and Testing Engineer, Eastgrid Switchgear (Jul 2020 – Mar 2022)
- Designed LT and HT panel layouts and single line diagrams in AutoCAD Electrical for 60+ customer orders.
- Ran routine and type tests on panels, including insulation resistance, high voltage and primary injection tests.
- Standardised bill of materials templates, cutting design-to-production lead time by 20%.
Education
- B.Tech, Electrical Engineering — Government Engineering College, Bhubaneswar (CGPA 8.5 / 10)
Skills
Substation design and execution, HT and LT panels, Single line diagrams, Testing and commissioning, Protection relay settings, Load flow and short-circuit studies, AutoCAD Electrical, ETAP, Earthing and lightning protection, Electrical safety and LOTO
Why this resume works
- Voltage levels, project value and number of substations make the scope of the engineer's work instantly clear to a technical reader.
- The bullets show the full project cycle, from studies and design to testing and commissioning, which utilities and EPC firms want in one person.
- Safety practices like permit-to-work and LOTO are mentioned with a result, which reassures employers in a high-risk field.
Electrical Engineer resume summary examples
Fresher
B.Tech Electrical Engineering graduate with internship experience at a 132 kV substation, covering switchgear, protection and maintenance practices. Skilled in AutoCAD Electrical, MATLAB and basic PLC programming. Seeking a graduate engineer role in power distribution, EPC or industrial maintenance.
2–5 years
Electrical maintenance engineer with four years of experience in a steel plant, maintaining motors, drives, transformers and MCC panels. Reduced electrical breakdowns by 25% through thermography and preventive maintenance. Known for safe working, fast fault finding and clear shift handovers.
Senior
Electrical engineering manager with fifteen years of experience in EPC projects for substations, solar plants and industrial facilities. Leads design and site teams of 30, manages vendor approvals and delivers projects worth over Rs 300 crore. Seeking a head of electrical or project director role.
Electrical Engineer bullet points you can adapt
- Installed and commissioned HT and LT panels, transformers and cabling for an industrial plant expansion.
- Prepared single line diagrams, cable schedules and earthing layouts in AutoCAD Electrical.
- Performed load calculations and cable sizing, keeping voltage drop within design limits.
- Tested and set protection relays, reducing nuisance tripping on critical feeders.
- Reduced plant electrical downtime by 30% through preventive maintenance and thermography surveys.
- Enforced permit-to-work and lockout-tagout procedures, maintaining a zero-accident record on site.
- Coordinated with vendors and utility inspectors for testing, approvals and energisation.
- Identified energy saving opportunities such as power factor correction and LED retrofits, cutting monthly bills.
Skills to put on a electrical engineer resume
Hard skills
- Power distribution
- Substation equipment
- HT and LT switchgear
- Protection systems and relays
- Testing and commissioning
- AutoCAD Electrical
- ETAP
- PLC and SCADA
- Motor and drive maintenance
- Cable sizing and load calculation
- Earthing design
- Electrical safety standards
- Energy auditing
Soft skills
- Safety awareness
- Problem solving
- Coordination
- Attention to detail
- Team leadership
- Clear documentation
How to write an electrical engineer resume summary
Start with your years of experience and your area, such as power distribution, substations, industrial maintenance, building services or design. Mention voltage levels and key equipment you work with, for example 33 kV switchgear or MCC panels. Add the tools you use, like AutoCAD Electrical, ETAP or PLC software, and one result that shows impact, such as projects commissioned on time or downtime reduced. End with the role you want. Technical recruiters look for voltage levels and equipment first, so do not leave them out.
Show safety and the full project cycle
Electrical work carries real risk, so employers look for engineers who work safely and follow procedures. Mention permit-to-work, LOTO, safety audits and your incident record. Then show your involvement across the project cycle: studies and design, procurement and vendor drawings, installation, testing, commissioning and handover. Use numbers such as substations commissioned, panels designed, kilometres of cable laid or downtime reduced. If you hold an electrical supervisor or contractor licence from your state, mention it in words, without listing the licence number.
Freshers: internships, projects and software
As a fresher, your internship and final-year project carry the most weight. Describe the substation, plant or company where you trained and the equipment and processes you observed or supported. Add your project with a short description and tools, for example a solar charge controller, a protection relay simulation in MATLAB or a smart metering prototype. List software such as AutoCAD Electrical, MATLAB, ETAP and PLC programming. Mention GATE scores if you are applying to public sector units, and keep the resume to one clear page.
FAQ
- What should an electrical engineer include in a resume?
- Include a summary with your area and voltage levels, experience with projects or plants, technical skills, software, certifications and education. Safety practices and measurable results make your resume stronger.
- How long should an electrical engineer resume be?
- One page works for freshers and engineers with under five years of experience. Senior engineers with large projects can use two pages.
- Should I mention my electrical licence on my resume?
- Yes, mention that you hold a state electrical supervisor or contractor licence if you have one. Share the licence number and copy only when the employer requests documents.
- Which software is important for electrical engineers?
- AutoCAD Electrical is widely expected. ETAP, DIALux, PLC and SCADA software and MS Excel are valuable depending on whether you work in design, lighting, automation or projects.